Digibell Vandal Resistant System Installationsanleitung PDF herunterladen (Seite 23)

Digibell Vandal Resistant System

PD-169 Issue 3B Installation Guide Page 23 of 56

Settings

Code

Default

Access

Description

ACOD 1234 Coded access code – must be 4 digits

TCOD 6789 Trade access code – must be 4 digits

LTIM 0003

⇑

Lock Time: 1-99 seconds

LOCK Secr Lock Type: Secr (fail secure), Safe (fail safe)

CAM2 No Not used

TRAD 0005 Trade Function: 0-9 – see table

DMON

Cwo Door Monitor Polarity: Cwo, Owo

RECP 9898 Reception / Porter phone number

PSEC 3434 Panel security code

PPRG 1212 Phone programming security code

RING 0015 Ring Time – see table

TALK 0015

⇓

Talk Time – see table

TONE Both Ring and Lock Buzz-Tone enable, 4 settings

CANC Yes Not used

BCAL No Not used

12A? No Allows user entry of 12A to call DBA-xx output 13

ACOD – Primary Access Code

This is the main code to open the door. It is required when the display prompts with [CODE]

after pressing the Trades button. The parameter ‘TRAD’ must be set to ‘Code’ or ‘Trade’ as

per the table below.

The code must be 4 digits and no letters, leading 0 is OK (e.g. [0246]).

TCOD – Secondary Access Code or Tradesmen’s Code

This is the tradesmen’s or secondary code to open the door. It is required when the display

prompts with [CODE] after pressing the Trades button. The parameter ‘TRAD’ must be set to

‘Trade’ in the active Time Clock setting, as per the table below.

The code must be 4 digits and no letters, leading 0 is OK (e.g. [0137]).

LTIM – Lock Release Time

Door unlocked duration. Range 1 to 99 seconds. Only the last 2 displayed digits are used.

A value of 0 will default to 1 second and a value containing alpha characters will default to 3

seconds.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 55 56

Keine Kommentare

Digibell Vandal Resistant System Installationsanleitung Seite 23